S355J2H structure steel seamless pipe

 Standard: EN 10210-1

Material: S355J2H, 1.0547

EN 10210-1 S355J2H structure steel pipe is a non-alloy hot finished structural hollow sections.  Grade S355J2H pipes and tubes are low-cost low carbon steel pipes with max 0.22 % carbon content with combination of max 1.60 % manganese easy to form and shape. The composition difference between S355J0H and S355J2H pipes is that the Phosphorous and Sulphur content of S355J2H pipe are 0.030% maximum, which is lower than that of S355J0H pipe. These pipes are manufactured as per EN Specification and commercially referred as cs pipes or ms pipes. Low carbon steel pipes are not as hard as high carbon steel pipes though carburizing can increase its surface hardness.

Chemical composition of EN 10210 S355J2H Steel Pipes

Carbon	Silicon max.	Manganese  max.	Phosphorous max.	Sulphur max.	Nitrogen max.
0.22	0.55	1.60	0.030	0.030	-

Mechanical Properties of EN 10210 S355J2H Steel Pipes

Min. Yield Strength Reh(Mpa)						Tensile Strength Rm (MPa)			Elongation % min.
t≤ 16mm	>16 ≤ 40mm	>40 ≤ 63 mm	>63 ≤ 80 mm	>80 ≤ 100 mm	>100 ≤ 120 mm	t<3 mm	>80 ≤ 100 mm	>100 ≤ 120 mm	t≤ 40mm
355	345	335	325	315	295	510-680	470-630	450-600	22

 

EN 10210 S355J2H Steel Pipes Tests and Inspections

Visual inspection

Dimensional check

Chemical analysis

Mechanical tests(impact test, tensile test)

Non-destructive testing

Are Looking for trusted exporter for EN 10210-1 S355J2H structure steel pipe? BBN Steel is a professional supplier of steel pipes in China. Welcome to contact us if you are interested in S355J2H steel pipes price.